PRO | MON - Monitor controller license for ax32 & dx32


The Pro | Mon  Monitor Control option enables the AX32 AD/DA Converter and digital matrix, as well as the DX32 Digital audio interface and matrix, to operate as an audio signal processor providing high resolution signal summing and low latency routing of monitor signals. The monitor control is managed via the DADman 4.2 software application, which has support for the EUCON 3 control protocol, enabling full control of the monitor functionality from the Avid S6 control surface.

- Monitor controller with talkback, summing and folddown
- Control via EUCON 3 from Avid™ S6, S3, MC Pro and 5-MC
- Built-in matrix for flexible routing and digital insert
- Configurable for any audio format eg. mono, stereo, 5.1, 7.1, 9.1, and up-to 64 ch. multi channel
- Pristine A/D and D/A conversion and optional mic pre
- Digital I/O via MADI, AES3, Dante™ and SDI
- Direct connection to Pro Tools HD / HDX / HD Native cards
- Fixed 7 sample latency on all signal paths and 32 bit floating point summing processing

DADman EUCON Control
The complete monitor control system consist of an AX32 or DX32 converter interface with a DADman software application running on a Windows or a MAC computer, which is communicating via EUCON on a Gigabit Ethernet enabling the operation of the monitor control from the Avid S6 Control Surface.  


Monitor Matrix and Processing
Monitor_control_picture_250pxThe monitor control is able to set the listening levels, Dim and Cut of a main control room speaker set and two alternate speaker sets. Furthermore, four monitor sets can be controlled with level and cut. 

The signal output configuration of each speaker and monitor set can be configured to any format: mono, stereo, 5.1, 7.1, 9.1, and multi channel up to 64 channels, using any of the audio outputs of the NTP/DAD converter interface in any combination. 

The sources for monitoring can be selected from any of configured signal sources. Sources can be selected to an monitor output as switched or more sources can be summed to a control room speaker or monitor output providing Stem summing functionality. 

As for the outputs source inputs can be configured to any format with any combination of audio inputs of the NTP/DAD converter interface.

Talk back functionality is available for any of the control room speaker and monitor outputs, and the talk back can activate Cut or Dim on any output as well.

On each of the control room speaker and monitor outputs a Folddown function can be applied. The Folddown can comprise of any of the 7 formats: Mono, Stereo, Left-Center-Right, Left-Center-Right-Sub, 5.1, 7.1 and 9.1 surround formats. On both the sources and the speaker and monitor outputs.


Pro | Mon | 3 SPQ Speaker Processor EQ Option 

The SPQ system consist of a DSP card that you can install in one of the 8 card slots of AX32. The SPQ Speaker Processor System is extremely flexible and you can match it to any speaker configuration, including immersive audio formats such as Dolby Atmos.

Management of the controls is handled via the DADman control software, where you can configure processing for all output channels in the defined monitor profile - also on cue signals. Processing can be applied for room tuning, bass management and equalizing of cue and monitor signals. And you can easily save and recall all configurations in the DADman monitor profile. 

- DSP/FPGA Card for AX32
- Room Tuning with up to 16 Filters Per Channel
- Bass Management with Support for Multiple Subs
- 1024 IIR Filters
- 128 channels @ 48 kHz
- Sample Rates from 44,1 to 384 kHz
- Adjustable Latency up to 150ms Per Channel
- Speaker Match Between Various Immersive Audio Formats


Speaker / Cue channel filters
-Parametric EQ
-Low Shelving
-High Shelving
-Low Pass Butterworth
-Low Pass Linkwitz-Riley
-High Pass Butterworth
-High Pass Linkwitz-Riley

BassManagement GUI

Bass Management Filters
-Low Pass Butterworth
-Low Pass Linkwitz-Riley
-High Pass Butterworth
-High Pass Linkwitz-Riley


ntp-icon-2 NTP Technology | Nybrovej 99 | 2820 Gentofte | Denmark |
Phone (+45) 45 96 88 80 | Fax (+45) 44 53 11 70 | Email:

Accept cookies