penta Expansion Cards and Modules for Penta 720 & Penta 721s
Dual SDI Embedder/De-Embedder
- 2 x SDI Embedder/de-embedder
- 16 channels pr. SDI
- 8 cards = 16 SDI Embedder/de-embedder
- Supports SD, HD and 3G SDI
- Built-in Sample Rate Converter
- Routing of single channels
128 ch. Dante/AES67 Interface
- 128 Channels in and out
- 8 cards = 1024 channels
- Built-in Sample Rate Converter
- Enables connection between unsynchronised
- Dante/AES67 networks
- Enables connection between networks with different sample rates
- Support for Dante Domain Manager
- Support for AES67 with SAP
- Network delay setting up to 21 msec.
Watch on YouTube...
Read More About the 128-channel Dante Card...
Dual MADI Interface
- 2 x MADI I/O
- 2 x 64 channels
- 8 cards = 1024 channels
- Built-in Sample Rate Converter on input
- Choice of physical interface
- Select type of SFP module
- Optical, MM or SM
- Coax
- Redundant mode
- Auto switch-over in case of signal loss
8 AES Interface
- 8 x AES I/O
- 16 channels in and out
- 8 cards = 128 channels in and out
- Built-in Sample Rate Converter on input
- Sample rates from 44.1 to 192 kHz
Analog Input
- Two card types
- 8 ch. LINE input
- 8 ch. MIC/LINE input
- Cards are physically identical
- LINE card can be upgraded to MIC/LINE by license
- MIC/LINE card provides:
- Phantom power
- Mic pre gain
- Phase invert
- Selectable max. line input level
- +9 dBu to +30 dBu in steps of 0.1 dB
Analog Output
- 8 ch. LINE output
- Selectable max. Output level
- +9 dBu to +24 dBu in steps of 0.1 dB
Audio Delay Processor
- Programmable delay for up to 128 ch.
- Individual delay pr. channel
- 128 'channel-seconds of delay'
- 128 ch. can be delayed up to 1 sec.
- 1 ch. Can be delayed up to 128 sec.
- Or any combination in-between
- Delay can be set in steps of 1 sample
- Suitable to achieve lipsync
Dante/AES67 Module
- 64 ch. Dante interface
- Support for AES67 with SAP
- Support for Dante Domain Manager
- Network delay setting up to 41 msec.
Dual MADI Module
- 2 x MADI I/O
- 2 x 64 channels
- Choice of physical interface
- Select type of SFP module
- Optical, MM or SM
- Coax
- Redundant mode
- Auto switch-over in case of signal loss
- Can operate as dual HotLink
- 2 x 128 ch.
- SFP/LC - Opt module multi mode 1300 nm low output LED / 647-110
- SFP/LC - Opt module single/multi mode 1300 nm, laser / 647-200
- SFP - Coax MADI tranceiver w. HD/mini-BNC / 647-400
NTP Technology | Nybrovej 99 | 2820 Gentofte | Denmark |
Phone (+45) 45 96 88 80 | Fax (+45) 44 53 11 70 | Email: info@ntp.dk
READ MORE HERE